OSEPP™ 101 Arduino Basics Starter Kit (incl. UNO Board)
Arduino Basics
- Discover Arduino through EASY and FUN lessons
- Step-by-step instructions with diagrams
- No prior electronics knowledge required
- Kit comes with everything you need to build your own:
- Volt Meter
- LED Game
- Buzzer Circuit and play melody
- INCLUDES the OSEPP UNO R3 PLUS board!
OSEPP™ Uno R3 Plus
Highlights:
- 8-bit AVR RISC-based microcontroller running at 16 MHz
-
| Microcontroller | ATmega328P |
| Clock Speed |
16 MHz |
| Flash Memory |
32 KB |
| SRAM |
2 KB |
| EEPROM | 1 KB |
- Connects to a computer via a standard USB cable
- Flexible power source (USB or DC power)
- ICSP header for programming microcontroller
- Compatible with existing Arduino software libraries
- Compatible with the Ethernet and Motor Controller Shields
Tutorial List:
- Tutorial: Loading the First Sketch
- Tutorial: Controlling Digital Outputs
- Tutorial: Using Digital Input
- Tutorial: An LED Game
- Tutorial: Building Voltage Meter
- Tutorial: Using Buzzer to Play a Melody
- Tutorial: Counting Down with a 7 Segment LED
- Tutorial: Powering the UNO R3 PLUS Using Batteries
Arduino Starter Kit Includes:
| OSEPP UNO R3 Plus |
1 |
| 6 feet USB type A to mini-B |
1 |
| Tact push switch 6mm x 6mm – through hole |
2 |
| DIP switch 4 position – through hole |
1 |
| 1K ohm potentiometer (variable resistor) – long pins |
1 |
| 10K ohm potentiometer (variable resistor) – long pins |
1 |
| 330 ohm axial resistor, 1/2W, 5% |
20 |
| 1 k ohm axial resistor, 1/2W, 5% |
5 |
| 10k ohm axial resistor, 1/2W, 5% |
5 |
| LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA |
2 |
| LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA |
2 |
| LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA |
2 |
| LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA |
2 |
| LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA |
2 |
| Two digits 7-segment LED – RED |
2 |
| Buzzer, 5Vo-p |
1 |
| NPN transistor |
2 |
| Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) |
1 |
| Ribbon Jumper Cables |
40 |
| 9 Volt Battery Connector |
1 |
| 2cm x 2cm x 3mm thick double side tape |
2 |
| Information sheet – Arduino UNO diagram + basic electronic theory |
1 |
| Really nice Kit container | 1 |
*Prices subject to change without notice. We reserve the right to limit quantities.
-
Part No
ARD-01
-
Manufacturer
OSEPP
-
Stock No
1811-BF2
-
SKU No
249553
To purchase bulk quantities, Please contact our Sales Department
(+1-416-494-8999) or email shop@sayal.com
OSEPP ARD-01 Document 1
