USB CABLE A-A MALE/FEM 49FT 3.1 ACTIVE OPTICAL PLENUM CABLE

Hall Technologies CUSB3V1-AP15 15 Meter USB 3.0/3.1 Gen 1 Javelin Active Optical Plenum Cable

Note:These cables are designed to extend USB 3.0/3.1 Gen1 signals on any platform. However, they can also support USB 1.1 and 2.0 legacy devices on Windows™ systems. CUSB3V1-AP* cables support transparent extension of USB 3.1 Gen1 Super-Speed at data rates of up to 5 Gbps. 

It is also downward compatible with USB 2.0 or 1.1 devices. 

An additional 5 volt regulator on the receiver end will boost the power to compensate for power hungry USB cameras. 

CUSB3V1-AP* cables are compatible with virtually all USB 3.0 and 3.1 Gen1 devices, and is a perfect solution for extending 4K videoconferencing cameras, video capture, docking stations, and other high-speed data communication. They also work with USB 2.0 or 1.1 devices although this feature is only available for PCs running Windows™ and needs a driver installation. Driver installation is not required for extending purely USB 3.0 devices on any platform (PC, Mac, Linux).The cable is a light-weight hybrid of fiber and copper, and is plenum rated to ensure compliance with modern building codes. The small cable ends can be easily pulled through most conduit, and no additional power is required, making the CUSB3V1-AP* a true plug-and-play solution. How can I extend legacy USB 2.0 or 1.1 devices with this cable? To answer this question, first let’s review the differences in USB 3.0 and 2.0 at the signal level. USB 2.0 devices use the 4 pins that you can easily see when you look inside a male A-type connector. USB 3.0 devices however do not use these pins, instead, they use their own dedicated USB 3.0 pins that are deep in the back of USB 3 connectors. The designers of USB 3.0 added these new pins in the back to allow backward compatibility so both USB 2.0 and 3.0 devices could be plugged into the same connector. The CUSB3V1-AP* cables actively extend the signals on the USB 3.0 pins using fiber optic cables, therefore USB 2 or 1.1 devices are not generally supported. However, if your host is using Windows™ operating system and you want to extend legacy USB2.0 or 1.1 devices with this cable, you need to install a Windows™ driver first. The driver is available for download under the Downloads tab on this page. Note for extending purely USB 3.0 devices you don’t need to install any drivers and the cable supports all platforms be they Windows™, Mac™, Linux™, etc. Features Data transfer rates of up to 5 Gigabits per second Offers fiber-optic noise immunity Plenum Rated Provides precise regulated 5v output power at the remote end @ up to 900 ma Supports all USB 3.0 devices on all platforms Thin and flexible with bend radius of 0.3 inch No additional power supply required Length - 15m

*Prices subject to change without notice. We reserve the right to limit quantities.