| # | Store | Qty | Aisle |
|---|---|---|---|
| Burlington | 2 | ||
| Cambridge | 2 | ||
| Markham | 3 | ||
| Mississauga | 4 | ||
| Scarborough | 2 | ||
| Vaughan | 3 | ||
| Warehouse | 6 |
It is an elastic one-component silicone liquid gasket. It fill
more gaps than other adhesive groups. However, shear strengths are
little lower than other adhesive groups. It is resistant to changing
weather conditions, UV rays, hot water, oil and grease. It is resistant
to temperatures between -65 ° C and 250 ° C. Especially suitable for use
in engines, gearboxes, oil seals, cylinder liners, carburetor covers,
water pumps.
Usage: The surface on which the silicone will be used must be clean, free from dust, oil, grease, rust and other substances that reduce adhesion. Before performing the repair work, remove the remnants of the old gasket. The applied silicone can be corrected with a spatula. Use plastic or stainless steel tools. After the procedure, clean the tools with a paper towel and rinse with a solvent. We recommend that you use silicone remover for uncured silicone. Apply the liquid gasket to a sufficient amount on one surface and wait 10 minutes and then assemble the parts.
WINKEL INDUSTRIAL PRODUCTS (CANADA) INC. W200-502 Safety Data Sheet 1
