Wired:
Make sure the battery is not in the Microphone. And plug the cord to the microphone and your audio amplifier
Switch microphone to MIC position, and start to sing
Wireless:
Install batteries into both microphone and receiver. Switch on them, the connection will be built easily. With LED indicator
Switch microphone to ON position, and start to sing
Switch microphone to MIC position when you need a short break. It won't collect other voices to the microphone
If it does not work normal. Use a screw to press the RESET hole on the receiver
If you don't use it for long time. Please take batteries(not included)out to protect the microphone's components
Frequency range: FM
Frequency response: 100Hz-1000hz
S/N ration: ≥60dB
Directivity: uni-directional
Operating voltage: DC 1.5V
Service areas: 8~20 Meters
Reception sensitivity: 30dB/uV
Wired sensitivity: -50dB±3dB(0dB=1V/Pa)
Impedance: 600Ω
Note:
A receiver can only be used with one microphone, not with multiple microphones.
You can not use 2 or more Microphones with the same color indicator at the same time!
If two wireless microphones are used at the same time,you must use them with one red and one green indicator, and use them with both receivers turned on.
*Prices subject to change without notice. We reserve the right to limit quantities.
-
Age
0+
-
Part No
1518191
-
Manufacturer
-
Stock No
ATFW-113
-
SKU No
255115
Limited Stock Available To purchase, Please contact our Sales Department
(+1-416-494-8999) or email shop@sayal.com
