Step-Up / Step-Down Voltage Regulator S18V20F6
Fixed 6V output with 4% accuracy
Input voltage: 2.9 to 32V
Typical maximum continuous output current: 2 A
The 6V Step-Up / Step-Down Voltage Regulator S18V20F6 produces a fixed 6 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.
Typical maximum continuous output current: 2 A (when input voltage is close to the output voltage; the Typical Efficiency and Output Current section below shows how the achievable continuous output current depends on input and output voltages)
Integrated reverse-voltage protection (up to 30 V), over-current protection, over-temperature shutoff, and under-voltage lockout
Typical efficiency of 80% to 90%, depending on input voltage, output voltage, and load
Four 0.086″ mounting holes for #2 or M2 screws
Smaller holes for 0.1″ header pins and larger holes for terminal blocks offer several options for connecting to the boardMinimum operating voltage: 2.9 V
Maximum operating voltage: 32 V
Maximum output current: 2 A
Output voltage: 6 V
Reverse voltage protection
Maximum quiescent current: 5 mA
-
Part No
PROPW-002006
-
Manufacturer
-
Stock No
1814-NA17
-
SKU No
274667
*Prices subject to change without notice. We reserve the right to limit quantities.
To purchase bulk quantities, Please contact our Sales Department
(+1-416-494-8999) or email shop@sayal.com
