22140
MOTOR SERVO MODIFIED CONTINUOUS ROTATION

Stock Number:
2625-AC1

---

What makes "continuous rotation servos" so cool is that all you had to do is plug it into a regular style "Power/Ground/Signal" style RC receiver (or micro-controller) jack, and feed it a 1.5mS signal. 1.5mS means it stayed still. Go down towards 1.0mS, and it would turn one ...More

25504
MOTOR SERVO MICRO 3-6V

Stock Number:
2625-FA1

---

HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9g servo.Features:Plastic Bushing25cm wireCore-less motorServo arms & screw includedSpecs:Size : 21x12x22 mm / 0.74x0.42x0.78 ...More

MOTOR SERVO MICRO SG90 3-7.2V

Stock Number:
2625-FA12A

---

GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPED

Stock Number:
2625-FA2

---

This is a modified GWS05 servo from Grand-Wing Servo. It's a servo body, with servo gears, but with continuous rotation, and no electronics. This a gear motor in a clear servo-case. No circuit board means you get a robust, servo-shaped motor. Each motor comes with a standard ...More

2730766
MOTOR SERVO 4.8-6V

Stock Number:
2625-FA3

---

Torque std.: 3.5kg/cm @ 4.8V; 4.8kg/cm @ 6.0V Speed std.: 0.17/60° @ 4.8V; 0.14/60° @ 6.0V Std.: 38.6×18.8×34.9mm; 37g Use angle : 160°...More

2730765
MOTOR SERVO 4.8-6V

Stock Number:
2625-FA4

---

Torque micro: 1.5kg/cm @ 4.8V; 1.8kg/cm @ 6.0V Speed micro: 0.12/60° @ 4.8V; 0.10/60° @ 6.0V Size: Micro 23×11.5×24mm; 8.6g Use angle : 160°...More

1028941
MOTOR SERVO 4.8-6V 180 DEG 2KG torque 0.12sec 22x12x21mm 12g

Stock Number:
2625-FA9

---

tem:PDI-9180MG Servo Weight: 12g Size: 22mmx12mmx21mm Torque: 2.2kg.cm (4.8v)  2.5kg.cm (6.0v)  Speed: 0.12sec/60deg (4.8v) - 0.10 sec/60deg (6.0v) Voltage: 4.8-6.0v Type: Analog Micro Gear Train: Metal Ball Bearing: No Lead Length: 180mm Plug: JR/FutabaFeatu...More

LS-8101F
MOTOR SERVO 6-7.2V METAL GEAR 360 DEGREES

Stock Number:
2625-GD1

---

Metal Gear Digital Servo 360 Wire Definitions: Black (-) Red (+) Yellow (signal) Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) Same as JR Wire Configuration Speed (sec/60deg): 0.16 @ 6V, 0.14 @ 7.2V Torque (Kg.cm): 12.5 @ 6V, 13 @ 7.2V Size (mm): 40.8 x 20...More

LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEG

Stock Number:
2625-GD2

---

Suitable for hobby, models, science and other projects.   Comparable to Servocity # 31311S20Voltage Range:  4.8 – 7.2 VoltsStall Torque (6.0V): 4.1 kg.cmStall Torque (4.8V): 3.2kg.cmJR Wire ConfigurationNo-load Speed (6.0V / 4.8V):  0.19sec/60° / 0.23sec/6...More

LS-S8220
MOTOR SERVO 4.8-6V METALLIC GEAR

Stock Number:
2625-EB2

---

Servo with metal gears Rotation: 60 degrees Voltage range: 4.8 - 6V Speed @4.8V: 0.12; @6V: 0.10 sec/60º Torque @4.8V: 1.2; @6V: 1.5 kg/cm Dimensions: 22.9 x 12 x 25.4mm Weight: 13g Assortment of servo arms included...More

LS-1006A
MOTOR SERVO 4.8-6V METAL GEAR ANALOG

Stock Number:
2625-FA10

---

Metal Gear Analog Servo Wire Definitions: Black (-) Red (+) Yellow (signal) • Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) • Same as JR Wire Configuration...More

LS-0009AF
MOTOR SERVO 4.8-6V METAL GEAR DIGITAL

Stock Number:
2625-FA11

---

Metal Gear Digital Servo Wire Definitions: Black (-) Red (+) Yellow (signal) • Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) • Same as JR Wire Configuration ...More

LS-0006
MOTOR SERVO 4.5-6V PLASTIC GEAR ANALOG MEDIUM

Stock Number:
2625-FB1

---

Plastic Gear Analog Servo Operating Speed (at no load)(sec/60deg): 0.12 @ 4.5V 0.1 @ 6V Running current (at no load) 120mA @ 4.5V 140 mA @ 6VStall torque (at locked) 1.0 kg-cm @ 4.5V1.2 kg-cm @ 6VStall current (at locked) 390 mA @ 4.5V 460 mA @ 6VIdle current (at stopped) 4 mA @ ...More