80-100
TOUCH SWITCH / CONTACT SWITCH

Stock Number:
2061-CB2

---

Both types of switch are built onto the one PCB so you can see and explore how each type works. A battery(not included) can power the touch switch (2 contacts) but a power supply (like kit 80-040) must be used for the touch plate (1 terminal) to work. High quality 12V relay rated...More

K-36
SOUND ACTIVATED SWITCH

Stock Number:
2061-CD2

---

Clap your hands and the light comes on...clap again and off it goes. Many other uses. Complete with microphone....More

MK139
CLAP ON/OFF SWITCH

Stock Number:
2061-CE1

---

Operate your lighting with a simple handclap Ideal for disabled or elderly people Good immunity against surrounding noises '1-clap' or '2-clap'-mode selection '2-clap'-mode features built-in safety turn-off timer (5h approx.) Output relay 'pulse' or 'toggle' selection Micro...More

CK252
CLAP ON/OFF RELAY SWITCH

Stock Number:
2061-CF1

---

This circuit will activate the relay when its sensitive microphone receives a sound such as for example a handclap. The relay will stay activated until the microphone receives another sound. The sensitivity of the microphone is adjustable. It includes a relay which can handle loa...More

TS1
TOUCH SWITCH

Stock Number:
2061-CF3

---

Touch once - it’s on, touch again - it’s off, or use the momentary outputs that stay on only as long as touched. Touch contact may be a door knob, small coin, or even a well watered plant! Uses low power CMOS circuitry and functions on the principle of hum and noise pick-up wh...More

VS1
AUTOMATIC VOX SWITCH VOICE OPERATED SWITCH

Stock Number:
2061-CF4

---

Directly switches relays or low voltage loads up to 100mA Use your voice or noise to control! Voice activated switch (VOX) kit will provide as witched output when it ‘hears’ sound. Use it to key a transmitter for hands-free PTT, or turn on a tape recorder automatically when p...More

126
MINI VOX AND RELAY KIT

Stock Number:
2061-EA1

---

The idea behind a VOX (voice activated switch) is that instead of the user pressing a switch to activate a relay, the sound of the users voice itself activates the relay. This gives hands-free control over devices like tape recorders. Power supply needed: 12VDC center positive 2....More

RELAY-5
RELAY KIT WITH 5 RELAYS & DRIVER

Stock Number:
2061-FB2

---

Increase the output of any kit up to 3 Amps. The Driver transistors are included on the kit. This allows you to operate each relay with Logic Level Signals. Connect to the VM kits or the TT-16 kit, and switch up to 300 watts of power. The Relay Kit is best suited for inductive l...More

K2633
RELAY CARD

Stock Number:
2061-FE1

---

Connecting a number of relays to the outputs of an electronic network may seem very simple, but in reality it might possibly create some problems regarding the cabling. This kit provides an attractive and compact alternative. It can be assembled and connected very rapidly....More

K8015
MULTIFUNCTION RELAY SWITCH

Stock Number:
2061-FE2

---

14 different functions including timers, switching, flashing, interval, random switching, ... Two pre-programmed delays. Learning mode for delays of 2s up to 12 days. Pushbutton control. EEPROM for delay time storage in case of power failure. On-board transient filter for the rel...More

K2634
QUAD TRIAC SWITCH CARD

Stock Number:
2061-FE3

---

Relays are usually used to switch AC voltages by means of an electronic control because of their simplicity. However, when switching occurs too frequently or too quickly the life time of the contact points is shortened considerably. This can be solved perfectly by replacing the r...More

PRC-1
RELAY CONTROLLER USING PIC

Stock Number:
2061-FF1

---

Multi Mode relay board based on a pre programmed PIC 12C509 microcontroller IC. Board features: DPDT Relay rated: 2A 30VDC /1A 120VAC resistive. Selectable active High or active Low trigger input. Delay 1: Immediate turn on with fixed .5sec delay on turn off OR variable 1.5sec...More

K8056
8-CHANNEL RELAY CARD..

Stock Number:
2061-FG1

---

This relay card can be used in several ways : as a stand alone card, addressed by switches or open collector outputs or remotely controlled through RS232. This card can also be remotely controlled using RF (radio frequency) signals by using the 8-Channel RF Remote and a 455 MHZ r...More