22140
MOTOR SERVO MODIFIED CONTINUOUS ROTATION

Stock Number:
2625-AC1

---

What makes "continuous rotation servos" so cool is that all you had to do is plug it into a regular style "Power/Ground/Signal" style RC receiver (or micro-controller) jack, and feed it a 1.5mS signal. 1.5mS means it stayed still. Go down towards 1.0mS, and it would turn one ...More

25504
MOTOR SERVO MICRO 3-6V

Stock Number:
2625-FA1

---

HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9g servo.Features:Plastic Bushing25cm wireCore-less motorServo arms & screw includedSpecs:Size : 21x12x22 mm / 0.74x0.42x0.78 ...More

MOTOR SERVO MICRO SG90 3-7.2V

Stock Number:
2625-FA12A

---

GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPED

Stock Number:
2625-FA2

---

This is a modified GWS05 servo from Grand-Wing Servo. It's a servo body, with servo gears, but with continuous rotation, and no electronics. This a gear motor in a clear servo-case. No circuit board means you get a robust, servo-shaped motor. Each motor comes with a standard ...More

LS-8101F
MOTOR SERVO 6-7.2V METAL GEAR 360 DEGREES

Stock Number:
2625-GD1

---

Metal Gear Digital Servo 360 Wire Definitions: Black (-) Red (+) Yellow (signal) Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) Same as JR Wire Configuration Speed (sec/60deg): 0.16 @ 6V, 0.14 @ 7.2V Torque (Kg.cm): 12.5 @ 6V, 13 @ 7.2V Size (mm): 40.8 x 20...More

LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEG

Stock Number:
2625-GD2

---

Suitable for hobby, models, science and other projects.   Comparable to Servocity # 31311S20Voltage Range:  4.8 – 7.2 VoltsStall Torque (6.0V): 4.1 kg.cmStall Torque (4.8V): 3.2kg.cmJR Wire ConfigurationNo-load Speed (6.0V / 4.8V):  0.19sec/60° / 0.23sec/6...More

MG995
MOTOR SERVO 4.8-7.2V HALF METAL GEARS 360 DEGREES ASSEMBLTY REQD

Stock Number:
2625-GD2AA

---

The Servo MG995 is a high-speed, metal gear servo motor. It can be used with most standard RC receivers, or with your own hardware that can output the required PWM signals, such as an Arduino compatible board. The servo comes with all of the required mounting hardware and ...More

UMTRR-011001
SERVO ARM L BRACKET

Stock Number:
2625-ZA2

---

MOTOR-002258
STEPPER MOTOR MOUNTING BRACKET NEMA-23 L-BRACKET

Stock Number:
2625-ZA3

---

MOTOR-102901
MOTOR BRACKET ZGA MOTOR 25D

Stock Number:
2625-ZA4

---

MOTOR-111184
MOTOR BRACKET 37MM MOTOR

Stock Number:
2625-ZA5

---