Gear Motor 3 - 224:1 90 Degree Shaft This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost! This model differs from the GM2 in that it has a 90 degree output shaft. This motor offers 48.61 in*oz of torque at 3V, rotating 360 degrees every 1.5 seconds (24 rpm - just a hair slower than a servo), drawing 400mA at stall (free running at 40mA). With a 7mm double-flat output shaft (avoid using the "D" output - it's not meant to take rotational load) and a built-in clutch (limiting at 60 in*oz, but easily "locked"), and built-in mounting screw holes, this is why we like these motors! Overall dimensions are 70.1mm long x 22.3mm x 37.7mm (2.76") x (0.878") x long (1.48") including output shafts, while only weighing 30.5grams or 1.08ounces. Description: 90 Degree Motor Gear Ratio: 224.00:1 At 3 Volts Unloaded RPM (3V): 24 Unloaded Current (3V): 40 mA Stall Current (3V): 400 mA Stall Torque (3V): 48.61 in*oz At 6 Volts Unloaded RPM (6V): 46 Unloaded Current (6V): 50 mA Stall Current (6V): 733 mA Stall Torque (6V): 56.94 in*oz Length (mm): 70.00 mm Width (mm): 22.50 mm Height (mm): 37.00 mm Weight: 40.00 g

---