STEPPER MOTOR 12VDC 60MA
Part No: MOTS2
Manufacturer: Velleman
Stock No: 2621-JA4
SKU No: 255020
Image is for illustrative purposes only. Please refer to product description.
$4.95 CAD
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 6 | |
| Markham | 6 | |
| Mississauga | 3 | |
| Scarborough | 3 | |
| Vaughan | 11 | |
| Warehouse | 168 |
STEPPER MOTOR 12VDC 60mA (ANGLE 7.5° / 48 STEPS)
- resistance: 170 ohm
- rated voltage: 12 Vdc
- current: 60 mA
- impedance: 200 ohm
- phase: 4
- step angle / step: 7.5° / 48
- reduction ratio: 1/85
- detent torque: 500 gf.cm
- pull-in torque: 650 gf.cm
- max. starting pulse rate: 350 pps
- max. slewing pulse rate: 800 pps
- temperature range: 45 °C
- noise: 40 dB
- cable: 450 mm AWG 1007#26
- terminal: JST SXH-001T-P0.6
- insulation strength: AC 600 V - 1 sec. cut-off current: 10 mA
- colours:
- 1: B1: pink
- 2: A1: orange
- 3: A2: yellow
- 4: B2: blue
- 5: GND: red
- 6: GND2 (for MOTS2): brown
RELATED PRODUCTS6 Product(s) found
KP35FM2-035
MOTOR STEPPER 1.8DEG/STEP W/WIREStock Number:
2621-AA1KP35FM2-035
MOTOR STEPPER 1.8DEG/STEP W/WIREStock Number:
2621-AA1
Manufacturer: Japan Servo Co. Ltd.Step Angle: 1.8 degreesWinding Voltage: 12-24 VoltsResistance per Phase: 37 OhmsCoil Winding: Bi-polarNumber of Steps: 200Amperage per Phase: 0.6 AmpsHolding Torque: 700 grams / cmNumber of Leads: 4, Phase One Blue/Red, Phase Two Yellow/WhiteBody...MoreREG.$14.95$9.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
11-SHBX-51KT H347
MOTOR STEPPER .312A 1.8DEG W/WIRStock Number:
2621-AA211-SHBX-51KT H347
MOTOR STEPPER .312A 1.8DEG W/WIRStock Number:
2621-AA2
Stepper Motor Current per phase : .312 A. Phase per step : 1.8 degress Wires attached....More$3.99 CADAvailable OnlineAvailable in StoresView Details
Products below are only available from our Warehouse. Please contact sales.
KP35FM2-035
JAPAN SERVO CO. LTD.
JAPAN SERVO CO. LTD.
MOTOR 125
MOTOR STEPPER 1.8DEG/STEP W/WIRE
K158
STEPPER MOTOR BIPOLAR DRIVER KIT
STEPPER MOTOR BIPOLAR DRIVER KIT
Stock Number:
2065-MA1
K158
STEPPER MOTOR BIPOLAR DRIVER KIT
This kit will drive a bi-polar stepper motor driver using externally supplied 5V levels for steping and direction.These usually come from software running in a computer. Construction:- Follow the overlay on the PCB. Add the lowest height components first, e.g. the resistors and d...More
STEPPER MOTOR BIPOLAR DRIVER KIT
Stock Number:
2065-MA1
This kit will drive a bi-polar stepper motor driver using externally supplied 5V levels for steping and direction.These usually come from software running in a computer. Construction:- Follow the overlay on the PCB. Add the lowest height components first, e.g. the resistors and d...More
REG. $39.95
$24.95 CAD SAVE $15
Available Online
Available in Stores
View Details
MTD-01
MOTOR DRIVER MODULE L298N 4 WIRE STEPPER OR 2 DC MOTORS
MOTOR DRIVER MODULE L298N 4 WIRE STEPPER OR 2 DC MOTORS
Stock Number:
1814-LD1
MTD-01
MOTOR DRIVER MODULE L298N 4 WIRE STEPPER OR 2 DC MOTORS
Motor Driver ModuleCan drive a 4-wire stepper motors, or two DC motors simultaneously for your Arduino project. Ability to control motor direction and speed when used with an Arduino. 100% Arduino Compatible L298 dual h bridge driver Reverse motor polarity (motor direction) The d...More
MOTOR DRIVER MODULE L298N 4 WIRE STEPPER OR 2 DC MOTORS
Stock Number:
1814-LD1
Motor Driver ModuleCan drive a 4-wire stepper motors, or two DC motors simultaneously for your Arduino project. Ability to control motor direction and speed when used with an Arduino. 100% Arduino Compatible L298 dual h bridge driver Reverse motor polarity (motor direction) The d...More
$30.95 CAD
Available Online
Available in Stores
View Details
WPI401
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDC
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDC
Stock Number:
1814-LC1
WPI401
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDC
A small and versatile motor and driver set. This 5 VOLTS DC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or compatible boards via jumper leads. Four-phase LED indicates the status of the stepper motor. Features ...More
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDC
Stock Number:
1814-LC1
A small and versatile motor and driver set. This 5 VOLTS DC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or compatible boards via jumper leads. Four-phase LED indicates the status of the stepper motor. Features ...More
$10.95 CAD
Available Online
Available in Stores
View Details
These products are ONLY available from our WAREHOUSE and a minimum handling charge of $15.00, per line item, on non-store items, may apply.
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2026 SAYAL Electronics and Hobbies