MOTOR GEAR 6V 48RPM GEAR RATIO 224:1 OFFSET SHAFT
Part No: GM2-2
Manufacturer: SOLARBOTICS LTD.
Stock No: 2641-FA1-2
SKU No: 224073
Image is for illustrative purposes only. Please refer to product description.
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 1 |
| Cambridge | 1 |
| Markham | 2 |
| Mississauga | 2 |
| Scarborough | 2 |
| Vaughan | 1 |
Gear Motor 2 - 224:1 Offset Shaft
This motor offers 48.6 in*oz of torque at 3V,
rotating 360 degrees every 1.5 seconds
(24 rpm - just a hair slower than a servo),
drawing 400mA at stall (free running at 40mA).
With a 7mm double-flat output shaft
(avoid using the "D" output - it's not meant to take rotational load),
and a built-in clutch (limiting at 60 in*oz, but easily "locked"),
and built-in mounting screw holes,
you can see why we like these motors!
These units have an overall size of
55mm x 48mm x 22.7mm thick,
2.17" x 1.89" x 0.894" thick
Weighing 31.4 grams or 1.11 ounces.
- Description: Offset / Inline
Gear Ratio: 224.00:1
- At 3 volts
Unloaded RPM (3V): 24
- Unloaded Current (3V): 40 mA
- Stall Current (3V): 400 mA
- Stall Torque (3V): 48.61 in*oz
- At 6 volts
Unloaded RPM (6V): 46
- Unloaded Current (6V): 50 mA
- Stall Current (6V): 710 mA
- Stall Torque (6V): 56.94 in*oz
- Length (mm): 55.00 mm
- Width (mm): 48.00 mm
- Height (mm): 23.00 mm
- Weight: 0.04 g