RELAY TIME DELAY 0-999HRS 1P1T 12vdc DUAL DISPLAY PANEL MOUNT
Part No:
Manufacturer:
Stock No: JNCC-1958A
SKU No: 266848
Image is for illustrative purposes only. Please refer to product description.
$13.95 CAD
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 2 | |
| Cambridge | 1 | |
| Markham | 5 | |
| Mississauga | 4 | |
| Scarborough | 4 | |
| Vaughan | 4 | |
| Warehouse | 19 |
DC 12V Dual Display Time Relay Module Time Delay Relay Mini LED Digital Timer Relay Timing Delay Cycle Control Switch
Features
1: Parameter setting is simpler
2: Small and exquisite appearance
3: Direct output type
4: Timing range: 0~999 (seconds, minutes, hours)
Mounting opening: 45.5x26.1mm
Timing range: 0~999 (seconds, minutes, hours)
Technical parameters: DC12V 2OA MAX 240W MAX
Working humidity: 35%~85%
Working temperature: -10~60℃
Direct output wiring is convenient, green start and red stop, easy to set
Code menu
Code menu introduction
Press and hold the S button for 6 seconds to enter the code menu
Mode setting demo
Double-click the S key to enter the parameter setting mode
safety warning
The output is active, connect the load and then power on to avoid short circuit
1.OUT: Output indicator
2.S key: set key
3. VIR key: scroll down (click) restart (press for seconds)
4.A key: turn up
5.LED1: Green power-on timing digital tube M
3. VIR key: scroll down (click) restart (press for seconds)
4.A key: turn up
5.LED1: Green power-on timing digital tube M
6.Point: The power-on timing in hours is running
7.Point: The power-on timer is running in minutes
8.LED2: red power off timing digital tube
9. Point: The power-off timer is running in hours
9. Point: The power-off timer is running in hours
10.Point: The power-off timer is running in minnutes
11.IN+: input positive
12.IN-: Input negative pole
13.0-:output negative
14.0+: output positive
Note: When the relay is energized and closed, the 13 Mand 14 circuits are connected to have power output When using, connect the load first and then turn on the power to avoid short circuit and danger
14.0+: output positive
Note: When the relay is energized and closed, the 13 Mand 14 circuits are connected to have power output When using, connect the load first and then turn on the power to avoid short circuit and danger
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2024 SAYAL Electronics and Hobbies