It is a one-component high strength Anaerobic product. Suitable for protecting threaded metal parts against loosening caused by shock and vibration. Generally used for assembling permanent bolts, screws and studs such as engine block and pump bodies. It works quickly and spontaneously in the absence of air between harmonious metal surfaces. It has a high resistance to corrosion, water, oils, hydrocarbons, gas and many chemical agents.

Usage: For best performance, the surfaces should be clean and free from oil. (We recommend our General Cleaning Spray W170 104 for that.) Apply the product to all surfaces to be applied. Make sure the gaps are completely filled and covered. Assemble the parts and do not move them during the drying period. Handy strength takes between 10-20 minutes, and full dry within 12-24 hours. Hardening is further accelerated with the help of activators. Can be disassemble by heating if necessary

---