BOOT STRAIN RELIEF RJ45 BLUE - SR-V82/BLB

The boots need to be placed onto the cable before both connector ends are terminated.
The boots help to protect the modular plug body, especially the latch tab, from external handling damage.
The strain relief feature on the boots helps to maintain the cable bend radius and limits conductor movement inside of the connector that can lead to continuity failures over time.
Prevents broken connector tabs and snagging while extending connector life
Strain relief boots help to minimize cable bends that can reduce data speed and result in data loss
Dampens cable movement and vibrations that can result in premature connector failure
Sized for Cat 5e and smaller diameter Cat 6 twisted pair cables
boot Fits standard RJ-45 8P8C connectors
Install and terminate RJ45 connector per connector instructions.
Slide the strain relief boot over the back of connector so connector tab is partially covered by the hood dome of the boot.
Strain relief Boots are reusable if cable is disassembled.