Sperry Instruments Digisnap 2400 Series DSA2417 Digital Leakage Clamp Meter TRMS Features: ¦Meets CE Requirements ¦Lifetime Limited Warranty ¦Shielded Transformer Jaws ¦Locates Ground Faults Without Costly Shutdowns ¦Checks Insulation With Power On ¦Broad Frequency Response (40Hz - 1KHz) ¦True RMS (DSA2417TRMS) ¦Water and Dust Proof Construction (DSA2417TRMS) ¦Auto Power Off (DSA2417TRMS) Specifications: Sensing: Average sensing, calibrated in RMS of a sinewave Display: Field effect 3.5 digit LCD with maximum reading of 1999 (2417) Range Selection: Manual selector switch Overrange Indication: N/A Response Time: Approx. 2 seconds (2417) Sampling Rate: Approx. 3 times per sec. (2417) Data Hold: For all ranges Peak Hold: Peak displays read 1/2 of peak input current (RMS calibrated reading when a sinusoidal AC current is measured) Frequency Response: 50/60Hz and 40 to 1KHz; 40~400Hz (2417) Max Conductor Size: 40mm ( 2417) Low Battery Indication: "B" symbol appears on the display (2417) Overload Protection: 1000A AC max. for one minute, 100V AC max for one minute (2417) Withstand Voltage: 2200V AC max. 3700V AC ( 2417) Insulation Resistance: 10MO (2434); 50MO ( 2417) Storage Environment: -10° to 50°C (14° - 122°F) at less than80%RH (2417) Operating Environment: 0° to 40°C (32° - 104°F) at less than85%RH Power Supply: One (1) 9V Transistor type battery Part #B-4 (2417) Dimensions: 8.2"H x 3.8"W x 1.8"D (209 x 96 x 45mm) (2417) Weight: 2417: 16 oz. (450g), NOTE: Instruments designed to take current readings on circuits with a maximum of 600 Volts AC. Packaging: Each of the Digisnap Snap-Arounds come with one (1) C-52 Carrying Case, (DSA2417TRMS form #352), one (1) 9V Battery.

---

Overload protected 1000 A (50/60 Hz) 100 V Meets CE Requirements Shielded Transformer Jaws Locates Ground Faults Without Costly Shutdowns Checks Insulation With Power On Broad Frequency Response (40Hz - 1KHz) True RMS Water and Dust Proof Construction Auto Power Off